Performance attributes
| Interface Å1 (G.703) |
| Quantity |
1, 2, 3 or 4 |
| Connector |
RJ-45 |
| Bit rate |
2 048 x (1±50 x 10-6) Kbit/s |
| Line code |
HDB3 or AMI |
| Impedance |
symmetrical 120 Ohm |
| Attenuation |
up to 12 dB |
| |
|
| Interface Ethernet 10/100/1000 BaseT |
| Quantity |
1 |
| Connector |
RJ-45 |
| Capacity |
100 or 1000 Mbit/s |
| Upper limit frame size |
9600 byte |
| |
|
| Optical interface |
| Connector |
SFP |
| Bit rate |
1.3 Gb/s |
| Port number |
2 or 1 (WDM) |
| Distance |
up to 120 km |
| Line code |
NRZ |
| Type oscillator |
LASER |
| Wave length |
1310 nm,
1550 nm |
| Level of optical power during the information transmission |
no more than minus 3 dBm |
| Overlapped attenuation |
up to 27 dB with corncrib < 10-10 |
| |
|
| Control |
Interface
RS232 |
Software is a standard ANSI - terminal (CLI) |
Interface Ethernet
10/100 BaseT |
SNMP, Telnet, SSH |
| |
|
| Power supply |
| Voltage |
DC 18 - 72 V AC 220 V adapter can be connected in |
| Power |
up to 6 W |
| |
|
| Dimension and weigh |
| Execution |
Rack mount option (slot in 19'', 1U rack) |
| Height x Width x Depth |
35 x 120 x 177 |
| Weigh |
0.5 kg |
| |
|
| Environment |
| Temperature |
from 5 to 40°Ñ |
| Relative humidity |
from 5 to 80% |
| Atmosphere pressure |
not below 60 kPa | | | |
intends for simultaneous transmission:
- 1, 2, 3 or 4 E1 lines;
- Fast Ethernet or Gigabit Ethernet traffic.
|
by one (WDM) or two fiber optic cables (fiber optic connection line).
The bit rate by optic cable is 1.3 Gb/s.
The main features of equipment are:
- opening of the ports E1 with licensed keys;
- opening of the ports Ethernet with licensed keys;
- plug-in modules (SFP);
- Maximum Transmission Unit (MTU) - 9600 byte;
- session log saving date, time and character of events in nonvolatile;
- loading new software support by PC;
- indication states of device by means of LED, and indication of alarm by beep;
- possibility to check local and remote equipments;
- low power consumption (lower than 6 W);
- length of warranty is 5 years;
- compatibility with PolyKom-200U-1GT;
- compatibility with PolyKom-300U-1GT.
|
Control of device is realized by means of:
- F-port (RS-232/RJ-45) with ANSI;
- Q-port (Ethernet 10/100 Base-T) SNMP-protocol v.1.0 with any SNMP manager, Telnet, SSH.
Multiservice terminal fiber optical multiplexer PoliKom-200U+ can be managed by means of PC:
- monitoring of local and remote equipments in real time;
- redesign of local and remote equipments (including loopbacks);
- revision of log in local and remote equipments.
All interfaces of device are compliance with ITU-T G.823, G.747, G.704, G.703, G.651, G.652, G.654.
Available variants of optical interface:
- 1310 nm for 1 fiber mode;
- 1550 nm for 1 fiber mode;
- two-forked transiver 1310/1550 nm for 1 fiber mode work.
